This seat was cleaned
thoroughly and I mean cleaned
Allowed to dry
The dye was dabbed on using the sponge supplied - 2 coats in
this instance were applied to the damaged area - the side
bolster
20 minutes were allowed between for the coats to dry/be
absorbed into the leather
Cashmere
X
type sand leather
This seat had some seriously sticky material stuck to it
I cleaned the seat with white spirit and followed up with
the cleaner
Allowed to dry
The dye was dabbed on using the sponge supplied - over 6
coats in this instance were applied to the whole squab as
some of the original dye had to be removed
Weather conditions forced 1 hour intervals between for the
coats to dry/be absorbed into the leather
X
type sand leather
The
armrest, I discovered had been worked before and upon
cleaning all of the original treatment had to be removed
which uncovered teeth marks from a dog!!!
I filled the teeth marks with a flexible filler and then
dyed the whole armrest
1999 XK8 Ivory
This seat was cleaned
thoroughly and allowed to dry
The dye was dabbed on using the sponge supplied - 2 coats in
this instance were applied to the damaged area - the side
bolster and the armrest
Unfortunately the customer didn't have 1-2 hours to spare so
only one coat was applied but the improvement is obvious -
the customer finished the job at home
X 300
Oatmeal
This seat was cleaned thoroughly
Allowed to dry
The dye was dabbed on using the sponge supplied - 2 coats in
this instance were applied to the damaged area - the side
bolster
20 minutes were allowed between for the coats to dry/be
absorbed into the leather
The job was then complete
Sable
steering wheel
The steering wheel was Sable in colour and had to be dyed
with an additional dye kit , you can see the difference, the
right hand side has clearly been treated, the left hand side
has not
